GeneMpls
03-16-2014, 02:53 PM
I would like to thank TJ for his vacuum jig tutorial and a lot of other people
who post pictures and knowledgeable threads. This is a spacer made from
phenolic with gasket grooves that a friend was having trouble getting a
machine shop to do correctly. Looked like a learning experience to me...
so here we go. And I learned a *lot* by the way. Thanks Gene
PS- I was using a scrap piece of Phenolic and one corner got cut off.
who post pictures and knowledgeable threads. This is a spacer made from
phenolic with gasket grooves that a friend was having trouble getting a
machine shop to do correctly. Looked like a learning experience to me...
so here we go. And I learned a *lot* by the way. Thanks Gene
PS- I was using a scrap piece of Phenolic and one corner got cut off.