PDA

View Full Version : MEPLA-Alfit Central Flolrida



bruce_taylor
07-14-2009, 11:41 AM
Anybody have a good source for mepla hardware in florida.
The place I used to get them from doesn't have them now.
I have the insertion machine and it is different than Blum.
Thanks
Bruce

coach
07-14-2009, 01:51 PM
Bruce.....Call Alan @ 407 399 6243 (his cell)
He is a saleman for Hardware Imagination Tech.
He carries the hinge you need.
I was just speaking with him.
David

coach
07-14-2009, 01:56 PM
Bruce if you need a couple hinges to carry you, let me know.
You remember where my shop is?
David

bruce_taylor
07-14-2009, 10:20 PM
THANKS DAVID,
I have a few and have been using blum. But have about 30 door to do and it is more than usual so i didn't want to screw them all in.
The insertion works better but the blum pattern doesn't work on the Mepla machine. Not a big fan of Hardware imagination since Dan left as the rep. They seem messed up. Chris Hyatt was good when he ran avonite but they lost that. I'll have to try them once more if no one else carries them around here. I appreciate the offer. I'll stop in to see you when I have a chance.

coach
07-14-2009, 10:37 PM
Bruce, glad to help out. I can tell you Alan is a stand up guy. He shows when he says. Prices are what he tells me. He goes the extra mile.
Avonite has a warehouse in Titusville now. I see Chris time to time.

coach
08-28-2009, 07:13 PM
Hey Bruce, did you ever find a new source for mepla hinges?
I am due to purchase some and if you found a better deal maybe you can share some info.
I have removed the 2 dowel bits on my machine in order to use other type hinges. But like you say,,,,it is better than screwing them in.