missing post processor

[matt.green]

I've just gotten my PRSstandard 96x48 up and running and i'm trying to cut my first part. When i go to save my tool paths from vcarve pro it says "no processors were loaded... Reinstalling the application should solve the problem"

It didn't

What do i do now? Help =)


Matt

[Brady Watson]

Go here: C:\SbParts\PartWorksPosts and copy the ShopBot_TC_Inch post processor (and MM if you want it) - they will have a .pp extension. Then paste them here: C:\ProgramData\Vectric\VCarve Pro - Shopbot Edition\V7.5\PostP

Then close & re-open VCP. You should now see them in the drop down list when you go to save a toolpath.

-B

[matt.green]

That's just what I tried and I was coming back to post here to see if that was okay.

A W E S O M E !!!!!