TJ
04-07-2014, 10:12 AM
Please join me for ShopBot Tools online training this Wednesday April 9th at 1:00pm EST to learn all about Pocket and Profile Toolpathing.
These two toolpaths are used in most projects that users are working with. Sometimes a pocket toolpath may be more useful than a profile toolpath inside the line. Tips and tricks like this will be discussed and demonstrated for this online training. Other topics like ramps, start points, order of cut will all be explained and discussed.
The first hour will be the training and the following hour will be Q @ A for all users to participate in. I hope you can join us. This session will be recorded for users who cannot make the time slot.
Thanks, TJ
1. Please join my meeting.
https://global.gotomeeting.com/join/892572973
2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone.
Dial +1 (636) 277-0130
Access Code: 892-572-973
Audio PIN: Shown after joining the meeting
Meeting ID: 892-572-973
These two toolpaths are used in most projects that users are working with. Sometimes a pocket toolpath may be more useful than a profile toolpath inside the line. Tips and tricks like this will be discussed and demonstrated for this online training. Other topics like ramps, start points, order of cut will all be explained and discussed.
The first hour will be the training and the following hour will be Q @ A for all users to participate in. I hope you can join us. This session will be recorded for users who cannot make the time slot.
Thanks, TJ
1. Please join my meeting.
https://global.gotomeeting.com/join/892572973
2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone.
Dial +1 (636) 277-0130
Access Code: 892-572-973
Audio PIN: Shown after joining the meeting
Meeting ID: 892-572-973