Looking for this file.

[RWilloughby]

Looking for the file for this Tardis or one like it, Not the 3d model, but an actually file.
I really wanna make this.

Thank you so much ahead of time

Edit: Forgot picture.

http://i.imgur.com/nRBtif4.jpg

[Kyle Stapleton]

About a 1/4 of the way down.
http://www.shopbottools.com/mSupport/projects.htm

[RWilloughby]

About a 1/4 of the way down.
http://www.shopbottools.com/mSupport/projects.htm

I don't see it.

[steve_g]

I don't see it.

Oh good… I thought it was my old age creeping up on me…
SG

[Kyle Stapleton]

It is all there, not sure why you guys can't see it.

Bull using 123D Make by Autodesk

Designed for ShopBot by TJ Christiansen

Overview: Autodesk has created several software's free to use at http://www.123dapp.com/ Using 123D Make users can take any 3d image, slice it into pieces, cut it on the ShopBot then glue it back together as a 3D model. By following these plans other models can be done in the same set of directions as the bull has been created.

Materials: .4” plywood

Minimum Cutting Area: 4’ x 8’

Bit Size: 1/4”

Finishing: Spray paint to the color of ones choosing.

Project Files:
Bull Tutorial [Download pdf]
Bull Project Files [Download zipped files]

[Kyle Stapleton]

Sorry thought you said "taurus"

[chiloquinruss]

http://www.talkshopbot.com/forum/showthread.php?t=17725&highlight=tardis

[bleeth]

This is pretty easy to draw and toolpath. A good exercise in learning your software as you don't need anything beyond the basic software that came with your mill.