Adding Tools to Aspire Tool Database...

[Hizsigns]

Need help please. Simple task, trying to add surfacer #91-000 and 1/2" end mill #48-072 to tools so I can surface a piece of raw Blk Walnut to get clean surface. Have looked everywhere in instruction and nothing for adding tools in Aspire....Help

[Simops]

Stewart......head to this link..... http://www.vectric.com/vcarve-download/WhatsNew/WhatsNew.htm
Half way down there is a quick explanation of editing tool database in aspire....same really for VCP as well.
If still stumped come back....

Cheers

[Hizsigns]

Micheal, Thx.. will get newer version and should solve a few problems with set-up time... Much Appreciated
Stewart

[gundog]

I have Aspire 3.5 and while you have Aspire open click on toolpaths at the top of the screen and choose tool data base then add your new tool and perameters.