myxpykalix
11-24-2014, 02:26 AM
NO...not that!!...:eek: I skinned the table down to the plenum so i have nothing on the top right now and thought before i lay another sheet of mdf down with the changes in table designs, gaskets, glues i better ask if there is anything i should do before i commit it to glue?
FYI....some of you new guys...see that jagged line in the circle? Well before i cut my plenum in that plywood that jagged line was my first cut on the bot. The only problem is that it was a 1/2 endmill that went all the way thru 2 sheets of 3/4 plywood, buried itself up to the collet and didn't stop until it blew out 1 or 2 fuses in the control box:eek: So if you break a bit or ruin a piece of wood just realize you're not the first to screw up and won't be the last!:o:rolleyes:
FYI....some of you new guys...see that jagged line in the circle? Well before i cut my plenum in that plywood that jagged line was my first cut on the bot. The only problem is that it was a 1/2 endmill that went all the way thru 2 sheets of 3/4 plywood, buried itself up to the collet and didn't stop until it blew out 1 or 2 fuses in the control box:eek: So if you break a bit or ruin a piece of wood just realize you're not the first to screw up and won't be the last!:o:rolleyes: