scottp55
12-01-2014, 09:41 AM
Just resurfaced spoilboard preparatory to gluing some new MDF down(like Kyle S. did) and decided to double check my Z-plumb (+-.002" good enough for me for a 9" Radius) and checked all my Z bolts as I hadn't checked since the Mod. All good--THEN I checked my X-Rail bolts and got a thick hair OUT OF EVERY SINGLE ONE:eek:
Haven't checked every single bolt since I first put it on the MakerCrate so BAD "Bot owner. Everything else was tight except I got a hair out of 2 X-stepper's and 1 VFD mount.
If you had asked me yesterday I would have told you everything was golden. Mine is a little older than a year, used a lot, but NOT hard.
Maybe check yours?:)
Haven't checked every single bolt since I first put it on the MakerCrate so BAD "Bot owner. Everything else was tight except I got a hair out of 2 X-stepper's and 1 VFD mount.
If you had asked me yesterday I would have told you everything was golden. Mine is a little older than a year, used a lot, but NOT hard.
Maybe check yours?:)