KD The Libary

[kevin]

I finished off the year with a great project where also doing a front you look closely in the back. v-carved panel i listed closely to Joe its critical to not be to shallow or to deep
all work made out of African mahogany
will be ready second week in January for install
all parts made on the bot
did i mention going into 100 year old house

[Joe Porter]

Absolutely beautiful! This is your best work, Kevin...joe

[scottp55]

Can't wait to see that finished Kevin:)
Can you post a closer pic of the fluted corner with the "framed" 3D pocket?
Don't forget an installed pic!
Excellent!

[Simops]

Yes very elegant indeed!!
Did you do the fluted column on an indexer? What is your finishing strategy going to be?

Cherrs

[kevin]

Thanks for the compliments Joe i feel its my best work in Newfoundland .Since the beginning of the year Ive been using cherry staying away from tinted birch
Scott wait i will post better pictures
the fluted columns done on the indexing head 60 inches long had to spend a better part of a day to move the indexing head to work
the finishing min-wax English chestnut stain the watco danish oil.will spray 5 coat water based polyurethane .was going to try 2 coats of shellac but backed off due to little experience doing what i know best .I will not tint the customer is letting me do what i feel is best to bring out the grain .We lucked out on the wood it was a thrill to work with all parts are stained and oiled ready for spraying Monday

[bleeth]

Looks really nice Kevin. Good thing it wasn't any taller, huh?

[MogulTx]

I love your work Kevin. Great stuff!

if you get a chance, post a picture of the door detail that you did and tell us about it...

Monty

[dmidkiff]

Kevin, I like your work. It's always inspiring.

[Brian Harnett]

Nice job! I am sure the customer will love it.

[Ajcoholic]

I finished off the year with a great project where also doing a front you look closely in the back. v-carved panel i listed closely to Joe its critical to not be to shallow or to deep
all work made out of African mahogany
will be ready second week in January for install
all parts made on the bot
did i mention going into 100 year old house

Any install pics yet Kevin? Its going to look great. I love African mahog.

[Brady Watson]

Looks fantastic!

-B

[kevin]

We almost finished the install
The customer is away for a week will finish the crown a week from Monday
I'am glad its out of the shop .Dave its not to tall thanks for the compliments
I also lucked out a magazine is going to take photo for there spring issue
As for close up detail what I did is not hard all the answers are in the form .The v- carve is a pattern I found on the internet i did a few changes the flute are part works

I also did a double front door for these will post later .I need a wide angle lens

[Ajcoholic]

We almost finished the install
The customer is away for a week will finish the crown a week from Monday
I'am glad its out of the shop .Dave its not to tall thanks for the compliments
I also lucked out a magazine is going to take photo for there spring issue
As for close up detail what I did is not hard all the answers are in the form .The v- carve is a pattern I found on the internet i did a few changes the flute are part works

I also did a double front door for these will post later .I need a wide angle lens

That is very nice work Kevin. Really nice.

[scottp55]

Wow Kevin!!
It REALLY "Makes" the room!!
I think this is my favorite piece of yours:)

[nat_wheatley]

Wow, looks incredible!

[angel and the bear]

WOW is about all I can say, hope I can get near this good with my Shopbot!

[kevin]

http://kdunphy.com/1503_hc.jpg
We been featured in the Spring 2015 Home and Cabin.Click here to read (http://kdunphy.com/libaryarticle.html) http://kdunphy.com/libaryarticle.html






We where lucky to get an article .I've been following Joe's advice its the wild west out there for marketing very inexpensive .A documentary help called generation like on Netflix help to open my eyes .I do not offer advise

The door we made for the same house .Its been sitting around the shop for a couple of months the weather has been ****


http://www.talkshopbot.com/forum/attachment.php?attachmentid=24485&stc=1

[bleeth]

Congrats Kevin!

[scottp55]

Well deserved Kevin!!
Good for exposure and Portfolio:)
Definitely worth mentioning on your web pages as well as adding some "Installed" pictures!
scott

[Tim Lucas]

Very nice! Great Job!

[David Iannone]

Excellent work.

[kevin]

Thanks for the compliments .I did put the article on the web site .I didn't put a testimonial page on my web site mainly because shop in my area they write there own

My son is giving me a kick in the ass to go back after a couple week after install take photos .Which i not doing .Looking at getting a wide angle lens my photo compared to the magazine is **** because it the end of the install and I'm half dead its dark.What I'm learning is a cheap kitchen with the right photo looks like million dollars

[kevin]

I put my money where my moth .Went and visited after 1 month they didn't finish putting the plates at the top.But it was a pleasure they where happy with my work .I took a risk with the concrete I call it "A river run thorough it " very difficult to take a picture .I need lots of practice or invest in better camera.But this part of the job is so important




http://www.talkshopbot.com/forum/attachment.php?attachmentid=24506&stc=1http://www.talkshopbot.com/forum/attachment.php?attachmentid=24505&stc=1http://www.talkshopbot.com/forum/attachment.php?attachmentid=24504&stc=1