nat_wheatley
01-24-2015, 11:57 AM
I have a 60x96 PRS Alpha with 2 drills and am loosely considering adding a 3rd drill, if possible. The 3rd drill would only be used for drilling knob/handle holes in doors and drawer fronts while they're in the nest, so it doesn't need to be anything too elaborate.
I haven't looked into it too deeply, but am guessing that it would need to be something that bolted onto the outside of the existing drill cage. Any suggestions/ recommendations would be great. Thanks
I haven't looked into it too deeply, but am guessing that it would need to be something that bolted onto the outside of the existing drill cage. Any suggestions/ recommendations would be great. Thanks