Team Canada Camp ShopBot the 2004 Edition

[kerrazy]

Hey folks,
Start thinking about the weekend of August 27/28th.
Those interested in attending this year please send me an email with camp ShopBot in the subject line.

I will post more info over the next week or so.
Cheers,
Dale

[kerrazy]

Topics I am planning on covering this year will include:
Sign making 101, covering cutters, materials, and finishing tecniques as well as effective use of vinyl masks.
Routing plastics, such as cast and extruded acrylics, Sintra and other plastics.
ShopBot maintenance
ProfileLab Software and VisualMill Software.
ShopBot accessories, such as Steve M' great air deflector for the PC Router and ShopBots Accesory relays.
How To Cut Prismatic (bevel raised) and incised (v-Carved) letters effectivley.
If there are other topics you would like to see please let me know,
Dale

[Paco (Unregistered Guest)]

I'll be watching this post! 8-)

[normand]

See you Dale For a moment I tough June28 OUFF

[kerrazy]

Sorry, I forgot important info Like where the camp will be held....
Ottawa, Ontario.
I will have a website up again this year so watch for that over the next couple of weeks.
Dale

[kerrazy]

Just checking to see if there is much interest, as I have not had many responses yet.
Please drop me an email if your interested, If I do not have sufficient reponses by the end of next week I will put the camp on hold until a more suitable time, maybe next spring.
Dale

[paco]

I'll be watching this post! 8-)

[stevem]

Dale, your mail box is full

[kerrazy]

As mentioned above, I will try and focus on the use of the SHopBot tool in making signage. Here is a piece currently being worked on in our shop that makes use of paint masks, and different finishing techniques.Here is some dirt on this piece, it is 4' X 6' Vertical grain cedar with a walnut stain and several coats of Spar varnish. It is double sided (same design carved on both sides) the words Dental, Dentaire and phone numbers are v-carved with a 120Deg v-bit and the worde centre is prismatic or bevel carved with the same 120 degree v-bit. the background black colour is glass smalts and the gold due to clients budget constraints is one shot gold lettering enamel.

If this sort of thing excites you, then drop me an email and let me know you plan on attending this years Team Canada Camp ShopBot.

Dale
3523

[kerrazy]

Hey guys and gals,
We have a number of 12 confirmed so far for team Canada Camp ShopBot. I would like to see the numbers in the 20 plus range to proceed so if you have not signed up please do so over the weekend.
Cheers,
Dale

[kerrazy]

Due to a lack of registrations I am sorry but I will have to postpone this camp until the Spring.
Thanks, too all those that took the time to registered.

Dale

[pierrewessels@hotmail.com]

Dale,
Just occured to me that you may not have had a good response due to that being the weekend of the Atlanta IWF wood and equipment show - the monster of all equipment shows in North America.
Pierre
Abbotsford, BC