Collet Supplier?

[jdwykrent]

Where do you guys get your collets from?

[gc3]

http://www.ctctools.biz/er20-collet-imperial-f6000/

no matter the bashing that will follow...

this supplier works well for me in a production setting

[MogulTx]

Gene,

I have never gotten them from this supplier, but I do not spend $27 for a collet, either. There are surely some concerns and variations that must occur... but I have not yet been able to tell the diff. SO don't get to feeling too defensive!

Hope all is well with your business! Keep up the cool work!

Monty

[curtiss]

I use a lot of these inside my basic 1/2" collet,

They are quicker to change with the bit already in them.

http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bushing_ball_bearings.html

[cowboy1296]

http://precisebits.com/gateways/ColletsNutsHome.htm

[barrowj]

http://www.arceurotrade.co.uk/Catalogue/Collets/ER-Collets

Very inexpensive even with shipping.

[dlcw]

Get my collets from Tekniks. Have worked for me without failure since 2009. Have 4 different sizes I use regularly.