brett@r26D
02-21-2015, 02:41 PM
We recently moved to a new workspace and re-assembled our ShopBot. To test our setup we cut the files for the Breakout Table on OpenDesk.cc (https://www.opendesk.cc/lean/breakout-table). OpenDesk.cc has downloadable designs for desks, tables, chairs, etc.
We used a 1/4in compression spiral bit on four sheets of 3/4in maple-faced plywood for our Breakout Table build. The table is very sturdy. Some pieces are dowelled together. The top required double sided machining. More images and notes are posted at http://www.r26d.com/2015/open-desk-breakout-table
We used a 1/4in compression spiral bit on four sheets of 3/4in maple-faced plywood for our Breakout Table build. The table is very sturdy. Some pieces are dowelled together. The top required double sided machining. More images and notes are posted at http://www.r26d.com/2015/open-desk-breakout-table