View Full Version : Wiring for E-Stop..please help
TNWALKINGHORSE
03-14-2015, 12:14 AM
Hello, I noticed the green wire on my E-stop wire has come out and I don't no which terminal it screws down to. It looks like 1 and 5 are for the Z Zero Plate and 2 and ? are for the E-stop. This is a older 3.51 board for a PRT Standard SB. I will try to attach a picture as well. Thanks for your help. -Matt24434
bleeth
03-14-2015, 06:51 AM
The green wire goes to ground marked with a "G".
I believe you can find the manual online at Shopbots site.
Brady Watson
03-14-2015, 07:11 AM
Yep. Green to Gnd & Black to Input 4.
-B
TNWALKINGHORSE
03-31-2015, 10:04 PM
Thank you all. It is now fixed!!! :-)
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.