bob_dodd
03-24-2015, 03:20 PM
I know this is probably not the right forum to post , but thought it to be specific to the DT with Bill Young's spoilboard . I wanted a indexer that would be easy to change out when not being used and then needing to reinstall the spoilboard, I designed a Indexer to work with the spoil board on the machine . I used 6061 aluminum and the Desktop to machine the parts 1.2", .8 , 12000 RPM .004 , I purchased the parts I could not make. I also used 4 threaded inserts (Scott P.) to hold it down and dowels for alignment , I also want to thank Brady for stepper motor info specs , and Frank at Shopbot for pin pointing my computer problem
http://www.talkshopbot.com/forum/attachment.php?attachmentid=24496&stc=1http://www.talkshopbot.com/forum/attachment.php?attachmentid=24497&stc=1
http://www.talkshopbot.com/forum/attachment.php?attachmentid=24496&stc=1http://www.talkshopbot.com/forum/attachment.php?attachmentid=24497&stc=1