woodman08
04-24-2015, 03:42 PM
I spoke to john about his new jumbo drawing board and asked if i could use his explanation video.
These are boards are like my one board(54x70) that can be bolted together to create very large drawing boards, on the spec sheet he shows a configuration
of 5 foot x 16 feet long thats amazing.
Its all done by a calibration template that you lay on the board joint and tell the software the board size
I have included some pictures and video to show what he has acomplished
http://youtu.be/mFPBntZzq8E
this is a big change on drawing boards size is no limit
These are boards are like my one board(54x70) that can be bolted together to create very large drawing boards, on the spec sheet he shows a configuration
of 5 foot x 16 feet long thats amazing.
Its all done by a calibration template that you lay on the board joint and tell the software the board size
I have included some pictures and video to show what he has acomplished
http://youtu.be/mFPBntZzq8E
this is a big change on drawing boards size is no limit