Input 4 problem on my Shopbot alpha - Can't work now.

[pierrearchi]

Hello Guys,

Hope you will have some ideas about my problem : When I start my shopbot impossible to achieve a reset to boot the shopbot correctly.

- I have the red input 4 number and input 1 indicator that lights out sporadically in green in the window "position".
- When I press the button on the remote control reset, the window "driver, motor fault detected", the window remains present whereas usually it disappears.

I already followed Frank's recommendations:
- I have verified twice the connections of two remote controls.
- I updated the firmware.

I do not know what to do to use my machine again. That's four weeks it is down, and I do not find a solution.

Thank you for giving me some answers tracks because I have to run the machine back to work quickly.

Regards,

Pierre

[feinddj]

If you've checked your switches, its time to check your connections. Sporadic lights mean loose wires somewhere.
David

[pierrearchi]

Thank you david

[Michaelodunk]

If you are still having a problem try disconnecting the x y sensors if they go bad the machine does weird things. It worked on my machine.

Good Luck
Mike