Cutting edge of materials is jagged

[KGS94]

Why does the edge of the materials i cut comes out jagged rather i am cutting PVC, foam, acrylic or wood? And the part i don't want is the one that stays nice.
The cut out is jagged and part left that i dont want is nice?

[bleeth]

Sounds like you are cutting in the climb direction in your toolpath commands. Change to conventional and that should do the trick.

[RossMosh]

If you cut into the material 75% of the way, do you still have the problem?

[jerry_stanek]

An Onsrud told us that you look at the waste and if the edge is better reverse the direction of the cut.

[Brady Watson]

"Don't throw away your best edge"

Climb vs Conventional. If the trash looks better, switch it.

-B

[KGS94]

Thanks, am gonna try that.

[KGS94]

Sounds like you are cutting in the climb direction in your toolpath commands. Change to conventional and that should do the trick.
Thanks Bleeth. Am gonna try that.

[KGS94]

If you cut into the material 75% of the way, do you still have the problem?
I've tried it at 75% and that doesn't really happens. depending on the thickness am cutting too.

[KGS94]

Thanks for the tips guys. I'll let you know how it goes on my next cut :).