For Sale: ShopBot Desktop 1HP spindle package - Los Angeles

[mmak2916]

This ShopBot Desktop (24" x 18" x 5.5") was bought 13 months ago. Works perfectly and comes with all the original instructions/documents, software (VCarve Pro), dust hose, and 8 bits and collets. This is the HSD 1hp spindle model. The bits included are all sharp and some of them are unused.

Bits & Collets:

Onsrud 65-023 - 1/4” One Flute Upcut Super O Flute
Onsrud 61-040 - 1/8" One Flute Straight
Onsrud 60-111MW - 1/4" One Flute Max Life Compression
Onsrud 57-910 - 1/4" Two Flute Downcut
Onsrud 37-61 - 1/2" Carbide Tipped Two Flute Up-shear V
Onsrud 52-240B (unused) - 1/8" Solid Carbide Two Flute Upcut Ballnose
Onsrud PCL583659 (unused) - 1/16" Tapered Ball Nose
Centurion 1/4" DIAMETER 2 FLUTE DOWNSHEAR 1" CUT LENGTH 3" OVERALL
1/8” collet
1/4” collet
Technik’s 1/2” Collet (unused)
Technik’s 1/4” Collet (unused)

Preferable local pickup in Los Angeles, CA. I still have the disassembled crate, and if necessary, I can freight ship it. However, buyer will be responsible for freight cost, logistics and possible damages (that may occur during transit).

Selling for $5000 (originally paid $7800+). Serious buyers and offers only.

27243 27244 27245 27246

[rcnewcomb]

Does it come with a Z-zero plate?
What is the version of V-Carve Pro?Deck:
Does it have the aluminum "T" slot extrusion deck in addition to or underneath the MDF spoilboard?

You can email me if you wish: randall at 222artisans dot com

[mmak2916]

It comes with the z-zero plate, VCarve Pro 7 (I upgraded to 8 using the registration code, I can provide that) and has the T slots underneath the spoil board.

[mmak2916]

Here's some additional photos showing the T-slots underneath the MDF spoilboard.

27271 27272

[mmak2916]

This unit has been sold, thanks