View Full Version : Well I have another "I can't find this bit" post.
Austin Shafer
03-02-2016, 08:44 AM
My work uses this kind of bit a lot and they had them in stock since before I worked here and I can't seem to find them anywhere. Its 60 degree 1/2" shank and the flat tip seems to be 5/32". Can someone help me locate this?
27429
Looks like that bit engraved a brick
Austin Shafer
03-02-2016, 08:57 AM
Looks like that bit engraved a brick
I know right! Its a pretty old one. I have one thats in better shape than this that is usable for a little.
barrowj
03-02-2016, 11:00 AM
Try here, this looks like it: http://www.magnate.net/ProductDetails.asp?ProductCode=784
Joe
Austin Shafer
03-02-2016, 11:20 AM
Try here, this looks like it: http://www.magnate.net/ProductDetails.asp?ProductCode=784
Joe
Looks promising, I might try them.
willmorgan
03-02-2016, 12:25 PM
Hey Austin,
See if this one works for you.
http://ballewsaw.com/southeast-tool-se1560-c-t-60-deg-v-groove-x1-2-cd-x1-2-sh-x-2-1-4-oal.html
rcnewcomb
03-02-2016, 01:15 PM
It looks similar to the CMT 849.501.11
Diameter
1-1/8"
Cutting Length
3/4"
Angle
60°
Length Overall
2-1/2"
Shank
1/2"
http://www.cmtutensili.com/show_items.asp?pars=RB~7/8/949
ADAPT_Shop-Brady
03-02-2016, 05:24 PM
Looks promising, I might try them.
Unless it's just a typo, it looks like the overall diameter is over an inch! Your photo looks more like 5/8" overall diameter.
garyb
03-02-2016, 06:11 PM
Its a number 7722 sign lettering bit from MLCS
Gary
Austin Shafer
03-03-2016, 06:30 AM
Its a number 7722 sign lettering bit from MLCS
Gary
That's the one! Awesome, Thank you everyone for all the help and suggestions.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.