Wanted- Drag knife, Donek or other.

[Siahjo2]

Looking for a Donek drag knife or or something that works like it.
Would also consider a tangential controlled knife or roller types.

Thanks all,
Joe

[Xray]

Check this guy out

http://forum.vectric.com/viewtopic.php?f=2&t=24466&hilit=drag+knife

27614

[Bobtail Farms]

If you would consider making one, you may look at what Brian Oltragge designed and built: http://www.cnczone.com/forums/general-other-machine-discussion/205452-cnc-software.html

A year or so ago, I purchased plans from Brian ($5 at the time). IMHO, well drafted plans. With a some 6061, and some generally available hardware, and a tap for threads, I built two drag knives from those plans for my own use. Machined and assembled and worked without a hitch. Cut and score cardboard, arts and crafts foam, paper and sintra - what I wanted it for, and had an application.

[travesty42]

I have a Donek D1 for sale. email me. travis@ttcustommarine.com