Monitor and Tool Caddy

[ADAPT_Shop-Brady]

Quickly got tired of my "pile" of stuff rolling on/around the bed.
27637
Needed a way to keep all the necessities close and secure when operating and blowing off the work area after cutting. Came up with this.
27640
27638
27639
27636

The monitor mount is attached to the Bot and the tool caddy is attached to the mounting bolt hole on the monitor mount base plate.


Link to the monitor mount ($99 on amazon when purchased):
http://www.amazon.com/AmazonBasics-Single-Monitor-Display-Mounting/dp/B00MIBN16O/ref=sr_1_1?ie=UTF8&qid=1458594783&sr=8-1&keywords=amazon+basic+monitor+mount

[ADAPT_Shop-Brady]

Will make a second revision when I have some more time. The Toolpathing on the v bit was too deep on the text and not deep enough on the chamfers. Also want to add a hole for the air nozzle hook.

[curtiss]

I tied my wrenches together with a string so I can lose then both at the same time....

Those round rotating pen & pencil holders from Staples work well for a lot of stuff.