mclimie
03-23-2016, 01:33 AM
Hi all,
If there are any ShopBot owners in SE Atlanta (Stockbridge, McDonough, Griffin, etc) or reasonably close that do contract work, I'd like to connect.
Essentially we have a need to cut HDU (31# Ren initially) contra molds, 11-24" diameter, no more than 1" cut depth. HDU, bits and tool paths would be provided. I attended an intermediate training at SB HQ where we cut some molds, so we have all the workflow kinks worked out of that process.
There would be 3 bit changes per job; rough, finish and pencil cleanup.
If anyone is interested, please let me know so we can start a dialog and see if it's workable. I know this stuff is time intensive, so hopefully it's do-able. Thanks for reading!
Marc
If there are any ShopBot owners in SE Atlanta (Stockbridge, McDonough, Griffin, etc) or reasonably close that do contract work, I'd like to connect.
Essentially we have a need to cut HDU (31# Ren initially) contra molds, 11-24" diameter, no more than 1" cut depth. HDU, bits and tool paths would be provided. I attended an intermediate training at SB HQ where we cut some molds, so we have all the workflow kinks worked out of that process.
There would be 3 bit changes per job; rough, finish and pencil cleanup.
If anyone is interested, please let me know so we can start a dialog and see if it's workable. I know this stuff is time intensive, so hopefully it's do-able. Thanks for reading!
Marc