Simops
04-09-2016, 03:58 AM
This may or may not be of some help to others looking at a way to organise their CNC bits and pieces. This is what I have.....
I made a cabinet that sits on the wall next to my Buddy. Within easy reach. I had my bits shoved in a box and was always searching for the right bit. And all my accessories were just scattered around. I had enough of dis-organisation so constructed my cabinet.
Picture 1: shows the overall area showing my computer (attached to Buddy) and the cabinet.
Picture 2: shows the whole cabinet with the see through drawers
Picture 3: shows the router bit storage that is catalogued with numbers that relate to a spreadsheet of bits on hand
Picture 4: relates to this spreadsheet which is attached to a sliding board that can be slid out easily from the cabinet to refer to.
Cheers
27817
27818
27819
27820
I made a cabinet that sits on the wall next to my Buddy. Within easy reach. I had my bits shoved in a box and was always searching for the right bit. And all my accessories were just scattered around. I had enough of dis-organisation so constructed my cabinet.
Picture 1: shows the overall area showing my computer (attached to Buddy) and the cabinet.
Picture 2: shows the whole cabinet with the see through drawers
Picture 3: shows the router bit storage that is catalogued with numbers that relate to a spreadsheet of bits on hand
Picture 4: relates to this spreadsheet which is attached to a sliding board that can be slid out easily from the cabinet to refer to.
Cheers
27817
27818
27819
27820