Lets check out our Russian artists

[joe]

https://www.youtube.com/watch?v=du_BkOyzUxA

https://www.youtube.com/watch?v=sVjyVP0n1hU

https://www.youtube.com/watch?v=XOli3FW6100

[kevin]

Joe
Or anyone else I started using 3d clip models from Russia there stuff is just way more advance compared to North America

http://www.ebay.ca/sch/i.html?_odkw=cnc+router&_osacat=11804&_from=R40&_trksid=p2045573.m570.l2632.R3.TR12.TRC2.A0.H2.Xcn c+3d.TRS0&_nkw=cnc+3d+relief+model+stl&_sacat=60435

[myxpykalix]

I have bought several models off ebay from Russian vendors and many are very good only something you need to ask when considering a model,
Ask seller to send you pictures of the individual parts (like if you are buying a table with multiple parts) and a list of each parts size.
One of the issues i have is they send you the parts. However many times as an STL when you load them up in a program they come in as GIGANTIC deminmsions and you don't know what size to reset them to...relative to the other parts.
Then you have 3D models that guys make buit they never show any real life examples because many of the 3D models have undercuts that you simply cannot cut on your machine and it makes the model look like (The word gets censored sheesh).

[kevin]

I found I think a good file I know some of it is buyer beware
See pic where also doing a large job Victorian house

http://www.talkshopbot.com/forum/attachment.php?attachmentid=27973&stc=1

http://www.talkshopbot.com/forum/attachment.php?attachmentid=27974&stc=1