PDA

View Full Version : Finial


mrspindle
05-17-2016, 06:36 PM
The latest creation to come off the SB. 7"x18" Cedar square finials to ship to the Boston area.
James M
05-17-2016, 07:23 PM
Mr Spindle,

I presume you model one side and cut it four times by rotating the "blank" four times?

J
scottp55
05-17-2016, 09:54 PM
VERY nice reproduction work! :)
scott
mrspindle
05-18-2016, 12:42 PM
James,
That is exactly what I did. I wanted to use the indexer, and program it to do a side, turn 90 degrees to do the next side, and repeat until all four sides were done.
This method worked great for a 3.5" blank, but with the big blank, I found that it would grab a little and turn it just enough to make the piece not perfectly square.
Jacob
myxpykalix
05-19-2016, 02:37 AM
EXCELLENT Indexer work.....