randybic1
05-23-2016, 09:58 PM
2831328309283102831128312PRS alpha 48 x 96 with a 5hp Columbo Spindle/Delta VFD 220V 1 phase
7.2 stepper motors – factory installed. Control box 110v 1 phase, 230v 3 phase
Ordered from Shopbot in December of 2006, just as the 7.2 stepper motors and the
new design was coming out.
Well maintained and runs great – always warmed up and cooled down.
3d digitizing probe
Proximity switches
Z Zero Plate
Dust collector
Dell 370 computer with 4m ram, windows XP
Kent dust foot – both long and short version - hasn’t been installed yet
Aspire v8.x – of course we will have to transfer the license through Vectric.
Dust collector 70 gallon/2HP
Assorted straight, round over and v bits, long 3d bits
Located in Owatonna, MN – my health just no longer allows me to keep my hobby
If you would like to see it run please contact me at rbicknase(at)yahoo(dot)com
$12000.00
7.2 stepper motors – factory installed. Control box 110v 1 phase, 230v 3 phase
Ordered from Shopbot in December of 2006, just as the 7.2 stepper motors and the
new design was coming out.
Well maintained and runs great – always warmed up and cooled down.
3d digitizing probe
Proximity switches
Z Zero Plate
Dust collector
Dell 370 computer with 4m ram, windows XP
Kent dust foot – both long and short version - hasn’t been installed yet
Aspire v8.x – of course we will have to transfer the license through Vectric.
Dust collector 70 gallon/2HP
Assorted straight, round over and v bits, long 3d bits
Located in Owatonna, MN – my health just no longer allows me to keep my hobby
If you would like to see it run please contact me at rbicknase(at)yahoo(dot)com
$12000.00