PDA

View Full Version : where to buy a new hsd spindle?



knight_toolworks
06-07-2016, 01:46 PM
my 4hp spindle bearings are getting noisy and sometimes stiff. I can't search for one without a model number who has the best price?

knight_toolworks
06-07-2016, 04:16 PM
anyone even know the price? shopbot sales is not working because of computer issues and I can't find that out.

dewey_dog
06-07-2016, 05:04 PM
Just bought one from SB on 3/14 total was $3510 spindle and VFD with shipping. Unfortunately they did not break down the invoice so I do not know what the spindle only cost was.

dewey_dog
06-07-2016, 05:05 PM
Oh yeah 4HP HSD....DD

knight_toolworks
06-07-2016, 05:11 PM
don't need the vfd. no one at shopbot is calling back.

Bob Eustace
06-07-2016, 06:35 PM
Missing Diane already eh?

gc3
06-07-2016, 06:47 PM
http://cncpd.com/cnc-parts/hsd-spindle-motors/

knight_toolworks
06-07-2016, 08:27 PM
Missing Diane already eh?


for sure. I found this. not sure on cost comparisons but 2d day air is only 70.00
http://www.blurrycustoms.com/#!store/cu2p/!/MT1073-140-ER25-2-2KW-220V-12-18K-CONNECTOR/p/36081639/category=9308356
the noise this is making has me worried. it was ok till I used a straight bit on these boxes I use a downcut on and now it is really noisy.

knight_toolworks
06-08-2016, 02:38 PM
I almost forgot I need the right spindle with the right fan. I can't get a call back from shopbot and hsd won't sell one directly.

knight_toolworks
06-08-2016, 08:08 PM
finally got a call from shopot. the place I posted had them for 1750 and 68 shipping shopbot was 1700 and 90 shipping second day. anyone want to hear some bad bearings let me know I will make a video.

Justin G
06-09-2016, 12:39 AM
Appreciate you posting your results to your search efforts. I would love to see that video if you don't mind recording it.

knight_toolworks
06-09-2016, 10:23 AM
will do. luckily I just have thin material to cut with a small bit mostly 1/8" like thin plywood and a bunch of sintra. I had a bunch of maple to cut but I told my customer I can't do it till I get the new spindle it would kill it. of course all these jobs are rush jobs and I don't have enough time as it is.

knight_toolworks
06-09-2016, 11:58 PM
well today was strange. the spindle made really loud noises starting and stopping though not always and once sounded like it was running but was hardly turning. but I stood it and it started ok. I just cut some sintra panels one on each end of the table and looped it so i would not have to start and stop the spindle much. then did some light pdf work slowly. with all the work I broke down and paid for overnight shipping so I can get it tomorrow as one customer is freaking out. here is the video it does not sound as loud as it is it made me jump several times. https://youtu.be/sd1DXxQ6LoU​ (https://youtu.be/sd1DXxQ6LoU)

Justin G
06-10-2016, 12:57 AM
I'm not a guy who startles easy but can totally relate to jumping as a result of things the bot is doing. Or rather, things I made the bot do that it should not have. With all the diving for the estop I was doing when I first got my bot I could have been a walk on for any MLB teams shortstop position. That spindle is definitely sounding very rough, you're right. Thank you for sharing that. Of course you have the most impatient customers ever when a machine goes down, does it happen any kier way?

knight_toolworks
06-10-2016, 08:36 PM
anyone want a 1800.00 paperweight? with the wear on the shaft and all I doubt it is practical to rebuild it. I can't find my original wrenches but I think the torque wrench was a bit loose fitting so it caused more of the mashing but i can't remember for sure. the fan housing slipped a little and the wire lever was a bit bent but a easy fix. but this was one of the easier fixes though.
http://www.talkshopbot.com/forum/attachment.php?attachmentid=28433&stc=1http://www.talkshopbot.com/forum/attachment.php?attachmentid=28434&stc=1http://www.talkshopbot.com/forum/attachment.php?attachmentid=28435&stc=1

Justin G
06-10-2016, 09:55 PM
Have you ever take a spindle apart and looked at the guts? I feel like it would be a worthy itch to scratch to see what that thing looks like in pieces.

knight_toolworks
06-11-2016, 11:00 AM
Have you ever take a spindle apart and looked at the guts? I feel like it would be a worthy itch to scratch to see what that thing looks like in pieces.

thinking about it if I can manage it. it really isn to up to being refurbished.