Quickie for our reunion

[danhamm]

Made this for our reunion, it was a hit.

[garyr6]

Nice work , They are right, you are a hero!

[cowboy1296]

I do 3-d, that was no quickie. What kind of wood and what kind of finish? Nice work.

[chiloquinruss]

"that was no quickie" I totally agree! ;) Russ

[danhamm]

It was a quickie for me as I have run stuff in the 109 hour range, this was only with rough cut and fini only 27 hours, the Wood is 3 inch clear cedar and min wax oil then Sikkens clear cote.

[James M]

That is a beautiful sign. Well done! Did you have to cut it twice being that it was softwood?

Again very nice.

[danhamm]

The rough cut was done with a 3/4 bit and the fini with a 1/4 rt. only one pass cross grain, very seldom get fuzz on dry cedar.

[elcar903]

Amazing job

[bobmoore]

That is some fine cedar. Great job Dan. How did you fasten to the posts?

[danhamm]

http://www.talkshopbot.com/forum/attachment.php?attachmentid=28598&stc=1Was bolted through the 2 stringers, easy to assemble or take apart.