Michaelodunk
07-16-2016, 11:29 PM
Hi everyone
My brother and I share a web site it started out as selling aluminum templates that cut mortises in stiles for making louvered shutters it has progressed well enough that we are getting 1/4 and 3/8 cutters made.
They only have a 1/2 inch of flute which makes them useless for cutting 3/4 plywood but I thought some of you might be cutting thinner material and they would work well for that. If you are cutting aluminum these would probably be a stronger bit because of the shorter flute length. The only reason I bring this up is the price seems pretty good.
1/4 bit 11.00
3/8 bit 20.00
Here is a link to the site
www.puritancnc.com
Thanks
Mike
My brother and I share a web site it started out as selling aluminum templates that cut mortises in stiles for making louvered shutters it has progressed well enough that we are getting 1/4 and 3/8 cutters made.
They only have a 1/2 inch of flute which makes them useless for cutting 3/4 plywood but I thought some of you might be cutting thinner material and they would work well for that. If you are cutting aluminum these would probably be a stronger bit because of the shorter flute length. The only reason I bring this up is the price seems pretty good.
1/4 bit 11.00
3/8 bit 20.00
Here is a link to the site
www.puritancnc.com
Thanks
Mike