Stuttering movement

[signxpress]

Hey guys I'm a Newbie here...I have a PRS STandard 96x48. In my case, a piece of waste material got caught in one of my xmotor gears while the gantry was moving. After that happened I noticed I was not getting smooth cutting when the gantry goes beyond X48" especially when cutting diagonally. In addition, the machine "stutters" when cutting beyond X48 (sometimes before) Cutting on the Y axis is ok. I've enclosed a photo to give u guys a visual.


THANKS MUCH

28710

[bleeth]

Odds are something got kicked out of alignment. Go through checking all of it from distance between x rails to square and level on gantry. Make sure you still have all 4 v rollers on x running smoothly on the rails.

[signxpress]

ok thanks...will do!!!