New BETA Shopbot Ecabinet version Link

[rtfosmoe]

All,

Here a the latest BETA shoplink for Ecabinet:


http://order.ecabinetsystems.com/updates/ShopBotLink1-0-21.aspx

[Keith Larrett]

Is this a new version of the ShopBot Link for eCabinets? Could you tell us more about this version please? What are the changes from v1.0.20?

I don't see any mention of it on the eCabinets site.

http://www.ecabinetsystems.com/ecabinet_systems_updates.htm (http://www.ecabinetsystems.com/ecabinet_systems_updates.htm)

Thanks

[tshall]

This is a Beta version, 1.21 2.

Items contained:
• Pocket screw construction is now supported. See the manual section Tooling->Operation Tool(s) Setup. (ADDED)
• Option to try and keep flip operation parts together in nest. The option is in Nesting Parameters. (ADDED)
• 2 tabs not working correctly. (FIXED)
• Off-fall not created on Added Sheets correctly. (FIXED)
• Scrap Recovery not obeying grain setting. (FIXED)
• Grain grouping across cabinets not working. (FIXED)
• Random unwanted cuts on tenons. (FIXED)
• Minimum feed rate not used with Climb cut designated. (FIXED)
• Pocket cuts going outside boundary when cutting spiral inside-out direction. (FIXED)
• Batch order from eCabinet Systems not maintained in Load screen. (FIXED)

This is really interesting and I'm very appreciative to TWC for taking the time to upgrade the link. I was hoping for an upgrade, now to test and see if everything works as it should.

[rtfosmoe]

All,

Just checked the Ecabinet System and they officially version 1.21.2 for the Shopbot link. You can find it here (http://www.ecabinetsystems.com/ecabinet_systems_shopbot_link.htm).