GigM
09-24-2016, 10:58 AM
A little painful to part with this machine, but simply don't have time to put it to good use at the moment.
Purchased in Fall of 2013 from a cabinet shop that did not have a use for the machine. I'd wanted to use it to fabricate millwork as a hobby, bookshelves mostly.
However, never got around to fully setting it up or using it due to my main line of work and it's been sitting partially assembled in my garage since.
Asking $7000, (have it listed on eBay with a starting at $6500, Buy It Now price of $8500). I will post photos shortly.
Specifications are:
PRT Standard
5' x 10' Table
Upgraded to the 4G Control Board
Dual Head/Dual Z Option - Giordano Colombo RS 90.2 5HP Spindle 240V 3 Phase, and a Porter Cable Router as the second head.
Delta VFD (I've purchased a new Yaskawa VFD as I don't have access to 3 Phase power, not included in price)
Control Computer with Monitor, Keyboard, Mouse
Z-Plate
Heavy Grounding wire and terminal connectors
Machine did come with a Dresser 15HP 240V 3 Phase Roots Vacuum System, but I sold this when I realized there was no way possible to power the vacuum system.
Additional items for sale but not included in price: Can bundle all of these in for a discounted price, price listed is roughly what I paid.
Yaskawa VFD: VU2A0040FAA-134 V1000 10-13.4HP, 240V Single Phase (for those who don't have access to 3 Phase power) ~860
Retrofit Leg/Support Kit (purchased an additional set of legs for mid-rail support on the X-axis, never installed) ~ $800
Collet (13001), Collet (13004), Router Bit Starter Kit (13699) ~$290
E-Track (ordered this so the wiring could be organized and routed neatly)
Located in Queens, NY. Free Local Pickup. Shipping can be arranged, actual shipping costs apply.
Purchased in Fall of 2013 from a cabinet shop that did not have a use for the machine. I'd wanted to use it to fabricate millwork as a hobby, bookshelves mostly.
However, never got around to fully setting it up or using it due to my main line of work and it's been sitting partially assembled in my garage since.
Asking $7000, (have it listed on eBay with a starting at $6500, Buy It Now price of $8500). I will post photos shortly.
Specifications are:
PRT Standard
5' x 10' Table
Upgraded to the 4G Control Board
Dual Head/Dual Z Option - Giordano Colombo RS 90.2 5HP Spindle 240V 3 Phase, and a Porter Cable Router as the second head.
Delta VFD (I've purchased a new Yaskawa VFD as I don't have access to 3 Phase power, not included in price)
Control Computer with Monitor, Keyboard, Mouse
Z-Plate
Heavy Grounding wire and terminal connectors
Machine did come with a Dresser 15HP 240V 3 Phase Roots Vacuum System, but I sold this when I realized there was no way possible to power the vacuum system.
Additional items for sale but not included in price: Can bundle all of these in for a discounted price, price listed is roughly what I paid.
Yaskawa VFD: VU2A0040FAA-134 V1000 10-13.4HP, 240V Single Phase (for those who don't have access to 3 Phase power) ~860
Retrofit Leg/Support Kit (purchased an additional set of legs for mid-rail support on the X-axis, never installed) ~ $800
Collet (13001), Collet (13004), Router Bit Starter Kit (13699) ~$290
E-Track (ordered this so the wiring could be organized and routed neatly)
Located in Queens, NY. Free Local Pickup. Shipping can be arranged, actual shipping costs apply.