mezalick
11-30-2016, 02:57 PM
For all the good little girls and boys...
A step by step instruction on how to make a 3-D model from a photograph using Aspire
It’s how I approach this type of project and each project is slightly different.
The files are here.
https://www.amazon.com/clouddrive/share/2IKp9OE56PVGn2WJZwk0nizV0z5swHy9VqzuMWYNTDJ?ref_=c d_ph_share_link_copy
This was made in the hopes that more people will take that next step in creating models for their CNC projects.
If you are interested in skipping this DIY manual you can purchase the finished model at.
https://carveddetails.com/product/cd1106-santa-2016/ (https://carveddetails.com/product/cd1106-santa-2016/)
Happy Holidays
Michaelhttp://www.talkshopbot.com/forum/attachment.php?attachmentid=29345&stc=1
A step by step instruction on how to make a 3-D model from a photograph using Aspire
It’s how I approach this type of project and each project is slightly different.
The files are here.
https://www.amazon.com/clouddrive/share/2IKp9OE56PVGn2WJZwk0nizV0z5swHy9VqzuMWYNTDJ?ref_=c d_ph_share_link_copy
This was made in the hopes that more people will take that next step in creating models for their CNC projects.
If you are interested in skipping this DIY manual you can purchase the finished model at.
https://carveddetails.com/product/cd1106-santa-2016/ (https://carveddetails.com/product/cd1106-santa-2016/)
Happy Holidays
Michaelhttp://www.talkshopbot.com/forum/attachment.php?attachmentid=29345&stc=1