Index of ALL commands?

[exmarine]

OK, I know I am getting very old and crabby. And it has been a while since I ran my desktop. I am setting up a new computer and see some commands in my carefully saved template file that I cannot remember or find in any of the manuals or help files. What's the deal with that?!

For example, what are:
CN, 90
C6
C9
etc...

Where are all commands documented?
Thanks.

[rcnewcomb]

Try this: ShopBot Command Reference (http://www.shopbottools.com/ShopBotDocs/files/ComRef.pdf)
And this manual references the C2 and C3 commands: ShopBot Users Guide (http://www.shopbottools.com/ShopBotDocs/files/SBG%2000142%20User%20Guide%2020150317.pdf)

[Gary Campbell]

There a few variations of those docs. When needed, they can be referenced from the [Help] menu and should be relevant to the version that you have installed on your machine.

[exmarine]

Of course I've checked all the help menus and files.

CN, 90 not there
C9 not there
C6 not there
C7 not there
CN, 91 not there

[Gary Campbell]

The CN, and C# commands are custom files (macros) that have commands listed in them. Open in an editor to see the individual commands. Often the editor will explain file action in the header of the file

[exmarine]

Thank you very much.

Those "custom" macro files appear to be in C:\SbParts\custom\*.sbc

I suggest they mention that in the help files and manuals. If it was already, I couldn't find it.

Thanks again.