Keith Larrett
12-28-2016, 09:39 PM
I recently wrapped up a pretty unique project. The project consisted of a set of bookcases 10' tall in an entrance area. On top of those bookcases was another set of bookcases just under 10' tall. The two sets were separated by a floor of an inch and half thick acrylic. A set of RGB LED lights were installed around the perimeter of the acrylic.
There was an open area on the wall just above the front door and, as my clients are passionate about books, I suggested they give me a quotation. I v-carved the quote and added some carved "fleur de lis". The quote completed the project and tied everything together.
There are more pictures of the project on my FaceBook page at the following link:
https://www.facebook.com/pg/SyzygyWoodworks/photos/?tab=album&album_id=1175720252507993
The bookcases were designed in eCabinets and cut on the ShopBot via the ShopBot Link.
There was an open area on the wall just above the front door and, as my clients are passionate about books, I suggested they give me a quotation. I v-carved the quote and added some carved "fleur de lis". The quote completed the project and tied everything together.
There are more pictures of the project on my FaceBook page at the following link:
https://www.facebook.com/pg/SyzygyWoodworks/photos/?tab=album&album_id=1175720252507993
The bookcases were designed in eCabinets and cut on the ShopBot via the ShopBot Link.