2006 PRT For Sale

[RichE]

Bought this used in 2012. I've used it lightly to cut ski cores and bases but the business isn't working so its time to sell it.

I would consider selling in pieces but would like to try to get it all gone in one deal.

It is a late model 2006 PRTalpha, extruded aluminum rails, new pinion gears, 2.2HP HSD spindle paired with Yaskawa VFD. Configured with 4 hold down zones on a 4x8 table and includes a port to hookup a shopvac to two zones when max hold down isn't needed.

Republic 7.5 HP single phase blower with overload relay and new belt

Air Drill with cables and carrier unit - Don't know anything about it
as I removed it before hooking up power.

KUFO 2HP dust collector and 20 feet of heavy duty grounded 4" hose

20 or so cutters including 1.5' Amana planer/flycutter/resurfacer
1/4", 3/8", and 1/2" collets
Donek Dragnife which I modified to accept a fine tipped knife

Asking 12,000 obo. Make an offer on individual components and I'll consider splitting things up if a buyer doesn't come up for the package.

Located in Ogden, Utah. PM for my email or phone number. Thanks.

Photos - https://drive.google.com/open?id=0B3vIoyZ95vuLZ0F5UW1hZFdqYm8

[RichE]

price reduced to $11,000

[myxpykalix]

what would you take for the dragknife? What model/version/brand is it?

[RichE]

It is/was a Donek D1 but I remilled the knife receiver head to accept a 10-049 (https://www.officesupply.com/office-supplies/tools-equipment/tools/utility-knife-replacement-blades/stanley-tools-standard-rotating-blade-pocket-knife-replacement-blades/p547464.html?ref=pla&cid=ad-pla-non-brand&product_id=547464&adpos=1o4&creative=82620377673&device=c&matchtype=&network=g&gclid=CjwKEAiAqozEBRDJrPem0fPKtX0SJAD5sAyHYOzF2ot8 2O8IiSzPgYnpk1Wow_qTBKtI9f_sr4uQnhoC7snw_wcB) knife, which is much sharper, heavier, and a finer point. I'm still using a it a little but if the buyer doesn't want it I'll let you know.

[RichE]

It is/was a Donek D1 but I remilled the knife receiver head to accept a 10-049 (https://www.officesupply.com/office-supplies/tools-equipment/tools/utility-knife-replacement-blades/stanley-tools-standard-rotating-blade-pocket-knife-replacement-blades/p547464.html?ref=pla&cid=ad-pla-non-brand&product_id=547464&adpos=1o4&creative=82620377673&device=c&matchtype=&network=g&gclid=CjwKEAiAqozEBRDJrPem0fPKtX0SJAD5sAyHYOzF2ot8 2O8IiSzPgYnpk1Wow_qTBKtI9f_sr4uQnhoC7snw_wcB) knife, which is much sharper, heavier, and a finer point. I'm still using it a little but if the buyer doesn't want it I'll let you know.

[cncworks]

looking to buy a used Shopbot and your selling one email at
cncworks@hotmail.com or text to 206.251.4357
P.S. I'm also a new member so hope this works

[RichE]

Sorry for the delayed response. Apparently the website link I included didn't make it past the moderator?

I remilled the knife receiver to accept a Stanely 11-041 knife. Much sharper and a finer point but its a little tricky to set up the offset so I'm not sure I feel comfortable selling it but was just going to include it as part of the package. If the buyer doesn't want it I'll let you know. I'd send it and 7 blades for 25 bucks if you're interested. That covers the cost of shipping and the blades.

[Cagent80]

Is this a 48x96 ? please contact me at 601 686 1730. very interested!

[RichE]

Shopbot has sold