makeCNC
01-24-2017, 10:34 AM
HI all
i recently purchased a PRT 48 X 96 machine and have been making some upgrades to it i ordered out a New control, system from Gary Campbell
and purchased a chinese 4KW air cooled spindle and VFD on ebay which i need to mount on the Z axis so i am going to have a mounting plate made at a local machine shop but i need to get drawings of the bolt pattern for the Z axis on the PRT
i am not good at this type of thing and want it to be perfectly accurate so i don't trust myself to measure things or do it right so the best way is to give drawings of the Z axis to the machinist does anyone have these that may have done this in the past ?
any help would be appreciated....here are the motor numbers if this helps to know what year the PRT is A6497-9412KTG vexta 25T on the pinion X & Y and 20T on the Z
i recently purchased a PRT 48 X 96 machine and have been making some upgrades to it i ordered out a New control, system from Gary Campbell
and purchased a chinese 4KW air cooled spindle and VFD on ebay which i need to mount on the Z axis so i am going to have a mounting plate made at a local machine shop but i need to get drawings of the bolt pattern for the Z axis on the PRT
i am not good at this type of thing and want it to be perfectly accurate so i don't trust myself to measure things or do it right so the best way is to give drawings of the Z axis to the machinist does anyone have these that may have done this in the past ?
any help would be appreciated....here are the motor numbers if this helps to know what year the PRT is A6497-9412KTG vexta 25T on the pinion X & Y and 20T on the Z