TJ
03-06-2017, 10:42 AM
Good morning everyone,
We have had several requests lately to bring back some basics for our online training sessions. Please join us this Wednesday March 8th, 2017 at 1:00pm eastern time. This week’s topic will cover “Table Surfacing”. Table surfacing is the first thing that operators should do before running their new machine. It is also something that should be done as routine maintenance. The training runs approximately 45 minutes. It is then followed up by a 45 minute Q & A for participates to ask questions and work with each other.
This session will cover how and when one should resurface their table. Demonstrations will take place on a Desktop, Buddy and full size Gantry machine.
There is no need to sign up, just show up a few minutes early on Wednesday and click on the link below. You will log into GoToMeetings and wait for the training to get started. Make sure your computer volume is turned on.
If you have any other questions please feel free to shoot me an Email. This training will be recorded and posted for future viewings. Those recordings can be found on our ShopBot Tools Training Page.
Thanks and hope to see you there. Thanks, TJ
Table Surfacing
Wed, Mar 8, 2017 1:00 PM - 3:00 PM EST
Please join my meeting from your computer, tablet or smartphone.
https://global.gotomeeting.com/join/319028933
You can also dial in using your phone.
United States: +1 (224) 501-3412
Access Code: 319-028-933
First GoToMeeting? Try a test session: http://help.citrix.com/getready
We have had several requests lately to bring back some basics for our online training sessions. Please join us this Wednesday March 8th, 2017 at 1:00pm eastern time. This week’s topic will cover “Table Surfacing”. Table surfacing is the first thing that operators should do before running their new machine. It is also something that should be done as routine maintenance. The training runs approximately 45 minutes. It is then followed up by a 45 minute Q & A for participates to ask questions and work with each other.
This session will cover how and when one should resurface their table. Demonstrations will take place on a Desktop, Buddy and full size Gantry machine.
There is no need to sign up, just show up a few minutes early on Wednesday and click on the link below. You will log into GoToMeetings and wait for the training to get started. Make sure your computer volume is turned on.
If you have any other questions please feel free to shoot me an Email. This training will be recorded and posted for future viewings. Those recordings can be found on our ShopBot Tools Training Page.
Thanks and hope to see you there. Thanks, TJ
Table Surfacing
Wed, Mar 8, 2017 1:00 PM - 3:00 PM EST
Please join my meeting from your computer, tablet or smartphone.
https://global.gotomeeting.com/join/319028933
You can also dial in using your phone.
United States: +1 (224) 501-3412
Access Code: 319-028-933
First GoToMeeting? Try a test session: http://help.citrix.com/getready