Working PRT controller for sale (and a couple routers)

[CStevens]

I recently upgraded to a RBK box and have my old PRT board and power supply that need a new home. I don't have the original enclosure anymore as I had swapped it to another PC box but never finished the full install. $200

Also have a couple porter cable routers sitting around doing nothing as well if anyone is interested or needs them. Make offer as I really don't know what they are worth

All of this was in use and working well when I removed them and upgraded to RBK and a spindle.

[Tom Bachman]

Where are you located? Which version of the board? Pictures?

Just as a point of reference, a new PC 75182 motor sells for around $300. If you have to have one totally rebuilt, it costs around $200

[jerry_stanek]

If they need bearings that is under $20 and you can replace them in about 30 minutes

[CStevens]

Can't get the photos to upload. Board shows V3.54, PRT012004-02175. Routers are Porter Cable, 75182. One works fine, the other had a bad switch so we wired around it. I also have one bracket to mount it to the Shopbot. I'm open on pricing, just cleaning and organizing the shop some.
I'm located in Tulsa, OK.

[TJWill]

I would be interested in the control board. Please call Tom at 973-248-7651. Thanks

[CStevens]

Called and left a msg Tom. Just get with me at your convienance if your still interested

[CStevens]

Made a deal with Tom on the board. Still have the routers if anyone needs one (or two)