Kent Dust Shoe Question

[rb99]

I have a Kent DS and I want to have it set up so it is not connected to the router. I have a PC router and don't want the foot to go up and down with the router. I propose to support it by the hose end, and use a piece of plastic taped over the router hole with a smaller hole for the head and bit to cut the work through.

Anyone done this? Any comments or suggestions?

Thanks

[jerry_stanek]

I made my own Dust shoe that I adjust myself I drilled and tapped the side of my x that doesn't go up and down

[rb99]

I made my own Dust shoe that I adjust myself I drilled and tapped the side of my x that doesn't go up and down

pics?
Cool. Got any


Why does this forum jump to the line above after a few words?

[Red F]

by Yoda
It was designed