PDA

View Full Version : Power supply



jerry_stanek
06-25-2017, 04:43 PM
My stepper power supply went out but I have another from another unit but it only has the the power for the steppers. What I need to know is where to get a 24 volt unit for the spindle fan and limit switches. I am not sure how many amps I will need for them

Gary Campbell
06-25-2017, 06:05 PM
Jerry...
Try here, there are a few to pick from: http://www.factorymation.com/Power_Supply_qs/MICRON-Compact-Plastic-18-to-100W_SB

jerry_stanek
06-27-2017, 12:04 PM
I did some more testing and found out when the surge took out my board it also burned the ground wires to the bot and the ground wire to the main power and also the hot line was broken inside the plug wire. I rewired a new plug on and back up and running