Edge banding

[don62]

Not directly shopbot item, but i am looking for a source for edge banding that you typically find on commercial furniture - like in the attached picture. Typical iron edge banding is thin and has little appearance feature - okay for shelves but not table edges.

Appreciate the help

[waynelocke]

You will have to cut solid stock yourself to get 1/8" or 1/4" edging.

[Tim Lucas]

woodworkers hardware has some 3mm thick, almost 1/8"
www.wwhardware.com
or check your local supply for 3mm edge band

[dlcw]

Edge Banding Services Inc

http://www.edgebanding-services.com/

[don62]

Don, Don here also - just talked to edgebanding services and they are sending me samples - the picture on the web site appears to be what i am looking for - great help, much thanks
don