mccoy178
01-25-2018, 11:32 AM
http://www.talkshopbot.com/forum/attachment.php?attachmentid=31111&stc=1
Any advice on what I'm doing wrong here would be appreciated. My indexer runs along the x axis on my machine and I do not see any x movement on either of these part files.
When I wrap it along the y axis, you can see that it still has the y moving instead of the x axis and it is only moving the length of the flattened blank instead of the length of it like when it is wrapped on the x axis.
Changing which axis was wrapped was the only setting change I made in Aspire on the two part files in the photo...
Any advice on what I'm doing wrong here would be appreciated. My indexer runs along the x axis on my machine and I do not see any x movement on either of these part files.
When I wrap it along the y axis, you can see that it still has the y moving instead of the x axis and it is only moving the length of the flattened blank instead of the length of it like when it is wrapped on the x axis.
Changing which axis was wrapped was the only setting change I made in Aspire on the two part files in the photo...