PRT Alpha 12' Long - Thinking about selling

[TheRuggedLab]

I have a PRT Alpha that is 48x144". Works just fine. It is plumbed for a hold down table. Porter cable router, nothing too fancy.

It is taking up too much space and I am considering selling it. I am looking for advice on what might be a reasonable asking price so I can weigh if I should sell and buy something smaller or just try and live with it. Thanks!

[Tim Lucas]

Pictures
what year
would you consider some kind of trade for a 48 x 96

have been thinking of 144 x 72

Tim

[TheRuggedLab]

I am away from shop today so can't get a picture today. I think it is a 2006 ish. I would consider a trade. What details do you have on your machine?

[bleeth]

You can also shorten your existing. No super big deal although needs to be planned well as you do have to remove your y, disassemble much of your frame and cut and drill some steel.
I will tell you that when you are done it will feel great. If you think you may want to go this route start a "modifying my 48144" thread in the mods section and you'll get plenty of guidance.