Updated to v9 lost Shopbot PP on all files

[Bob Eustace]

Just updated to v9 - zero problems with post processors in the past - used Shopbot Arc (inch) w/speed (*sbp). Now every file shows the first pp in the list plus this exact selection is no longer in the main list.
HELP!!!!! I do not want to have to re-enter the pp into every file because there are literally thousands.

Many thanks in advance

[tlempicke]

Easy one
After you have generated your toolpath go to "Save Toolpaths"

Toward the bottom of the screen that comes up you will see Post Processor
click on the drop down right below those words
Select "Shopbot Arc(inch)w/speed(*.sbp)"
save the toolpath

If you do not have the post processor in the list that drops down you can copy it from a previous version and put it in the list. Instructions on Vectric web site.

[srwtlc]

Go to your application data folder (File/Open app data folder) and look in the PostP folder for that .pp file. Copy/paste that file into the My_Postp folder and restart the program and that will be the only post in your list now (unless you place others in that same folder).