TJ
06-01-2018, 02:21 PM
Hello everyone,
Please join ShopBot Tools this Tuesday June 5th, 2018 for a free online training. The topic this week is “Know Your Materials” The training begins at 1:00pm eastern time and runs approximately 45 minutes. It is then followed up by a 45 minute Q & A for participates to ask questions and work with each other.
This week we will look into cutting different materials on your ShopBot CNC machine. There are a lot of different types that can be machined so we will focus specifically on wood, PVC, acrylic and aluminum. This training will cover machining these materials, recommended bits to use with feeds and speeds. We will also look into sources for finding different materials and other material specifics to look out for when purchasing and cutting.
There is no need to sign up, just show up a few minutes early on Tuesday and click on the link below. You will log into GoToMeetings and wait for the training to get started. Make sure your computer volume is turned on.
If you have any other questions please feel free to shoot me an Email. This training will be recorded and posted for future viewings. Those recordings can be found on our ShopBot Tools Training Page.
Thanks and hope to see you there. Thanks, TJ
Know Your Materials
Tue, Jun 5, 2018 1:00 PM - 3:00 PM EDT
Please join my meeting from your computer, tablet or smartphone.
https://global.gotomeeting.com/join/432538237
You can also dial in using your phone.
United States: +1 (669) 224-3412
Access Code: 432-538-237
Joining from a video-conferencing room or system?
Dial: 67.217.95.2##432538237
Cisco devices: 432538237@67.217.95.2
First GoToMeeting? Let's do a quick system check:https://link.gotomeeting.com/system-check
31648
Please join ShopBot Tools this Tuesday June 5th, 2018 for a free online training. The topic this week is “Know Your Materials” The training begins at 1:00pm eastern time and runs approximately 45 minutes. It is then followed up by a 45 minute Q & A for participates to ask questions and work with each other.
This week we will look into cutting different materials on your ShopBot CNC machine. There are a lot of different types that can be machined so we will focus specifically on wood, PVC, acrylic and aluminum. This training will cover machining these materials, recommended bits to use with feeds and speeds. We will also look into sources for finding different materials and other material specifics to look out for when purchasing and cutting.
There is no need to sign up, just show up a few minutes early on Tuesday and click on the link below. You will log into GoToMeetings and wait for the training to get started. Make sure your computer volume is turned on.
If you have any other questions please feel free to shoot me an Email. This training will be recorded and posted for future viewings. Those recordings can be found on our ShopBot Tools Training Page.
Thanks and hope to see you there. Thanks, TJ
Know Your Materials
Tue, Jun 5, 2018 1:00 PM - 3:00 PM EDT
Please join my meeting from your computer, tablet or smartphone.
https://global.gotomeeting.com/join/432538237
You can also dial in using your phone.
United States: +1 (669) 224-3412
Access Code: 432-538-237
Joining from a video-conferencing room or system?
Dial: 67.217.95.2##432538237
Cisco devices: 432538237@67.217.95.2
First GoToMeeting? Let's do a quick system check:https://link.gotomeeting.com/system-check
31648