change x and y axis

[hknisely]

I have a prt 48x96 I upgraded to a 4g control box . my problem is in aspire my x and y axis are different. is there a way I can switch the control box to change x and y direction

[bleeth]

You should change x-0 and y-0 in Aspire or...
Your origin should not have changed due to the upgraded box but assuming you changed the overall settings in SB-3 by running set-up (and/or upgraded your SB-3 you might need to go back in to set-up and make sure the entries there are correct.

[Gary Campbell]

Can you draw a quick sketch of how the axes are oriented now and what you would like to change them to?

[hknisely]

You should change x-0 and y-0 in Aspire or...
Your origin should not have changed due to the upgraded box but assuming you changed the overall settings in SB-3 by running set-up (and/or upgraded your SB-3 you might need to go back in to set-up and make sure the entries there are correct.

ever since I bought this use it was always different being working with it but it would help if they were the same

[bleeth]

Both Aspire and SB control software Origin location are simply making the correct settings in the software. Call Shopbot direct and they will get you going the right way quickly.

[hknisely]

I had to go to values and change x input and y input very easy but it sure took me a long time to find the trouble thanks for your help