uffabrew
02-18-2008, 06:57 PM
Are there any X & Y rail + Gantry Upgrades from Shopbot? Or does one need to get look for a third party suppliers?
I have an old Cable Drive system that was upgraded to a rack and pinion back in the late 90's. Last spring I upgraded it with a 4G control box, put we are still using the old uni-strut rails with the sliding screen door bearings.
I like what the 4G box has done, but now the old uni-struct and rails are showing a lot of wear. Instead of replacing them, I would like to upgrade.
Any ideas, solutions, from other ShopBot owners/upgraders?
I have an old Cable Drive system that was upgraded to a rack and pinion back in the late 90's. Last spring I upgraded it with a 4G control box, put we are still using the old uni-strut rails with the sliding screen door bearings.
I like what the 4G box has done, but now the old uni-struct and rails are showing a lot of wear. Instead of replacing them, I would like to upgrade.
Any ideas, solutions, from other ShopBot owners/upgraders?