bob_s
10-11-2018, 04:32 PM
This is a two year old rarely used immaculate Desktop Max with Spindle for sale.
It was purchased May 2016. Less than 100 hours of hobby use.
It has a full T slot aluminum deck on which I mounted a birch plywood panel with 5/16 threaded inserts. Then an MDF spoil board is attached. It is a system I developed for the PRS Alpha I previously owned to use nylon bolts and Baltic birch hold downs. plenty of spares are included and it is all totally removable.
VcarvePro Shopbot edition is bundled with the unit.
I have many hundreds of dollars of high quality bits, laser edge finder, and extra collets included. Most bits are unused.
It is located in Eastern Delaware, about 2 hours from Philly. It is running for seriously interested buyers. I do not want to ship it, but it will fit in the back of most any standard SUV.
$8400.
It was purchased May 2016. Less than 100 hours of hobby use.
It has a full T slot aluminum deck on which I mounted a birch plywood panel with 5/16 threaded inserts. Then an MDF spoil board is attached. It is a system I developed for the PRS Alpha I previously owned to use nylon bolts and Baltic birch hold downs. plenty of spares are included and it is all totally removable.
VcarvePro Shopbot edition is bundled with the unit.
I have many hundreds of dollars of high quality bits, laser edge finder, and extra collets included. Most bits are unused.
It is located in Eastern Delaware, about 2 hours from Philly. It is running for seriously interested buyers. I do not want to ship it, but it will fit in the back of most any standard SUV.
$8400.